5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer – 50 VOC

Price: $249.99
(as of Sep 11, 2024 05:38:29 UTC – Details)

Product Description

Solvent-Based High Gloss Wet Look Sealer For Concrete and Concrete Pavers

The Armor AR500 is a solvent based acrylic wet look sealer that is designed to seal, enhance, and protect a variety of exterior concrete and concrete paver surfaces. The Armor AR500 penetrates deep into the surface where it chemically bonds to the pores of the concrete and pavers, creating a long lasting, non-yellowing, breathable finish that enhances dull or faded surfaces by creating a darkened wet look, and high gloss finish.

Uses & Choosing The Right VOC

Uses:

The Armor AR500 is designed for use on poured concrete, stamped concrete, aggregate concrete, and concrete paver surfaces. It can be applied to unsealed surfaces, and surfaces previously sealed with a solvent-based acrylic.

Do not apply this product to red clay brick, slate, flagstone, or other types of natural stone. If you are looking to seal red clay brick, slate, flagstone, or any other type of natural stone, consider the Armor WL550 or the Armor SX5000 WB.

Choosing The Right VOC For Your State: VOC regulations for paint/sealers/coatings vary by state. Please use the following VOC guidelines to help choose the appropriate formulation for your project. If you have any questions, please don’t hesitate to contact a Foundation Armor technician.

700 VOC: The 700 VOC formulation can be used in every state except AZ, CA, CO, CT, DC, DE, IL, IN, MA, MD, ME, MI, NH, NJ, NY, OH, PA, RI, UT, VA.350 VOC: The 350 VOC formulation can be used in every state except CA, CO, NY, OH.50 VOC: The 700 VOC and 350 VOC formulations are the most popular formulations. The 50 VOC formula is manufactured specifically for states with high VOC restrictions such as CA, CO, NY and OH.

Please note that the above information is for informational purposes only, and based solely on information known to Foundation Armor at the time this page’s publication. VOC regulations can change, and can vary by county within each state. Please consult your federal, state, and local regulations to ensure you are using a VOC compliant product. 350 and 50 VOC formulations. ship HAZMAT and will require a direct signature.

BENEFITS Provides a Lasting Wet Look

When properly applied, the Armor AR500 can last for up to 1-3 years before the need for a recoat.

Won’t Peel, Flake, or Yellow

The Armor AR500 is breathable, UV-resistant, and non-yellowing. It is self-priming and offers a superior bond to concrete and concrete pavers.

Protects The Surface

The durable high gloss surface film will reduce damage caused by surface abrasion, spills, water absorption, road salts, and weather.

Made in The USA

The Armor AR500 is made from non-recycled US-manufactured resins! Our high quality formulations are made right here in the USA!

High Gloss Wet Look Finish Appearance

When applied in clear, the Armor AR500 will darken the surface to bring out the natural coloring the concrete or pavers, and seal it with a transparent high gloss finish.

The actual level of gloss and enhancement received will depend on the type and age of the surface, age, porosity, condition, applicator, application method, and amount of material applied. For an accurate representation of what your surface will look like once sealed, we suggest applying the product to a test area first.

How To Apply

The Armor AR500 can be applied with a 3/8-1/2” nap roller, or a solvent resistant commercial pump sprayer. For a consistent wet look and high gloss finish, apply two coats spaced 24 hours apart.

Time Of Day: The Armor AR500 should only be applied in the early evening when air and surface temperatures are declining, and when the sun is no longer positioned over the surface. To avoid bubbling and hazing, do not apply in the morning or middle of the day.

Surface Preparation: The Armor AR500 should be applied to a completely clean and dry surface. If the surface was cleaned with water or pressure washed prior to application, allow the surface to dry for at least 24 hours before sealing. While pressure washing the surface is typically sufficient, spot treatment may be necessary for deep or older stains. The Armor AR500 is designed specifically for use on unsealed concrete and concrete paver surfaces, as well as concrete and concrete pavers previously sealed with a solvent based acrylic. If the concrete is smooth or trowel finished, and doesn’t quickly and easily absorb water, other surface preparation may be required to open up the surface pores, such as acid etching or grinding. If applying over a surface with a water based acrylic, or old, degrading solvent based acrylic, remove the current coating with the Armor CR100 prior to applying the Armor AR500. The Armor AR500 should not be used to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone. If you are looking to seal clay brick, red Chicago pavers, flagstone, slate, or natural stone, consider instead of the Armor WL550 or the Armor SX5000 WB.

Note About Sealing Pavers: Please note, while the Armor AR500 can be applied over paver joints, it is not designed as a bonding agent and will not harden or bond the loose sand in the paver joints. If applying with a roller, loose sand in the joints may cling to the roller and be redistributed across the pavers. For best results, apply first coat with a sprayer if you are applying to pavers with loose sand in the paver joints.

When applying to porous pavers, gloss level may be reduced, and more material may be required to achieve desired finish.

Note About Applying the 50 VOC Formula: If you are using the 50 VOC formula, please note that due to the low VOC formulation, the working time with the product is reduced significantly. You will need to work fast, and in small sections. It is also important to avoid over-rolling the product. You must keep the roller heavily saturated to prevent the material from setting up as you are rolling. If you don’t keep the roller saturated, or if you over-roll, the material will start to set up and become tacky and stringy in texture. If the product is drying too fast and you need more working time, you can add up to 6 ounces of acetone per gallon of sealer and mix well.

Adding Foundation Armor Color-Packs: Opaque and semi-transparent color packs are available from Foundation Armor and can be easily mixed into the product before applying.

Adding Non-Slip: For added surface traction, the Armor Non-Slip additive can be added. The ultra-fine, fine, and coarse Armor Non-Slip additives works best in the Armor AR500. Applying the Ultra-Fine: Slowly drill mix 3-6.5 ounces of non-slip additive per gallon of sealer, until completely blended, then apply. For Fine and Coarse: When applying the second coat, add the non-slip additive to the coating using a broadcast spreader, and back roll to encapsulate the non-slip additive.

Clean-Up: Use Xylene or acetone. Dispose of containers in accordance with local and federal regulations.

What do I do if the sealer turns white or bubbles? If solvent-based acrylics are introduced to water, direct sun, or high heat during the curing process, white spots or bubbles can form. If this happens, simply roll over the areas in the early evening with Xylene, or the Armor Blush Repair, for 30-60 seconds until tacky and allow sealer to properly recure.

Up to 175 FT2/Gallon In One Coat Coverage

Porous Surfaces: Up to 175 FT2/gallon in one coat.

Smooth Surfaces (once properly prepped): Up to 200-225 FT2/gallon in one coat.

Coverage will vary depending on porosity, surface condition, application method, and the amount of material applied by the applicator. The above coverage rates are estimates and will vary. Two coats are suggested for even coverage and appearance. Please note, if it is your first time sealing pavers, or an overly porous surface, a third coat may be required.

More Great Foundation Armor Products To Consider

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Add to Cart

Customer Reviews

4.5 out of 5 stars
861

4.6 out of 5 stars
2,093

4.5 out of 5 stars
62

4.6 out of 5 stars
977

4.4 out of 5 stars
427

4.8 out of 5 stars
9

3.8 out of 5 stars
9

Price

$224.00$224.00

$224.00$224.00

$180.49$180.49

$224.99$224.99

$249.99$249.99

—

$169.99$169.99

Uses

Concrete/Pavers

Concrete/Pavers

Concrete/Pavers

Concrete/Pavers/Brick/Stone

Concrete/Pavers/Brick/Stone

For Sealers/Coatings/Paint

For Sealers/Coatings/Cleaner

Leaves Visible Surface Film

✔

✔

✔

✘

✘

✘

✘

Finish

High Gloss

Low Gloss

Low Gloss

Natural

Matte Wet Look

N/A

N/A

Base

Solvent-Based

Solvent-Based

Water-Based

Water-Based

Solvent-Based

N/A

N/A

Chemical Type

Acrylic

Acrylic

Acrylic

Silane-Siloxane

Hybrid

N/A

N/A

Life

Up To 1-3 Years

Up To 1-3 Years

Up To 1-3 Years

Up To 7-10 Years

Up to 3-5 YEars

N/A

N/A

Provides Wet Look

✔

✔

✘

✘

✔

✘

✘

Product Dimensions ‏ : ‎ 13 x 13 x 15 inches; 42 Pounds
Item model number ‏ : ‎ AR500 – 5 GAL – 50 VOC
Date First Available ‏ : ‎ May 13, 2014
Manufacturer ‏ : ‎ Foundation Armor
ASIN ‏ : ‎ B0CV4RHF5N

PROFESSIONAL GRADE CONCRETE SEALER & PAVER SEALER: Enhance and protect your exterior concrete and pavers with the professional-grade Armor AR500 solvent-based high gloss wet look concrete sealer and paver sealer. This concrete sealer is designed for use on unsealed concrete and pavers, and concrete and pavers previously sealed with a solvent-based acrylic concrete sealer.
DRAMATIC COLOR ENHANCEMENT: Formulated with high-quality US-manufactured resins, this concrete sealer is designed to darken and enhance concrete and paver surfaces. If you like what your concrete and pavers look like when wet, you will love the dramatic color enhancement offered by this wet look concrete sealer.
LONG LASTING PROTECTION: In addition to offering a wet look finish, this concrete sealer will provide a durable, long-lasting, non-yellowing, professional-grade high gloss finish designed to last for years in commercial and residential applications. This concrete sealer helps to protect concrete and pavers against damage caused by surface abrasion, foot and vehicle traffic, road salts, UV rays, water absorption, snow and ice, exposure to the elements, and more!
READY TO USE: Our ready-to-use concrete sealer can be applied to a properly cleaned and prepped surface with a roller or sprayer. One gallon covers up to 175-225 ft2/gallon. If you are looking for a concrete cleaner, consider the Armor MSC100 (sold separately).
EASY TO MAINTAIN: This solvent-based concrete sealer is self-priming, making it easy to use, and easy to maintain. When it is time to reseal your concrete or pavers, simply apply a single coat of the concrete sealer to a clean and dry surface with a roller or sprayer. Within seconds, your concrete and pavers will be instantly refreshed.
VERSATILE: The Armor AR500 can be used on a variety of concrete surfaces including poured concrete, broom finished concrete, stamped concrete, and concrete pavers. Common applications include driveways, walkways, patios, sidewalks, curbing, walls, and more!
FORMULATIONS FOR ALL 50 STATES: The Armor AR500 is available in (3) formulations to meet the concrete sealer VOC requirements in all 50 states: 700 VOC, 350 VOC, and 50 VOC. Please see the VOC information in the listing to choose the appropriate variation.